BALANCES AND MASSES |
ANALYTICAL BALANCE
Extended support beam angle & bearing plate. Capacity: 200 gm, Sensitivity : 2 mg. Fitted on wooden base. Two divided door case in front side pan. Three level screw with plumb line |
 MASSES - ACCURATE
Also made of Brass but accurately adjusted. Tolerances are given against each. Housed in a well polished wooden
box with hinged cover. A forcep is provided to lift the masses. Fractional weight set included.
A) 1 to 50 gm.
b) 1 to 100 gm.
Nominal mass 1, 2, 5, 10, 20, 50, 100 gm.
Tolerance + 2, 3, 4, 6, 10, 15, 20 mg. |
 BEAM BALANCE- DOUBLE BEAM
Two pan balance for accurate and rapid weighing upto 2 kg. when used with supplementary masses. The balance has two beams with centre indicating sliding masses to weigh upto 210 gm, spring loaded zero adjuster with magnetic damping. Stainless steel pans of 150 mm diameter. Taring beam and under weighing facility can be provided if desired.
Beams: 0 - 200 gm x 10 gm, 0 - 10 gm x .01 gm. |
 MASSES - CALIBRATION
Physical mass set. Made of Brass. Accuracy +3 %. Fractional weight set included.
a)100 gm set. Total 9 weights.
b)200 gm set. Total 10 weights.
c)500 gm set. Total 12 weights.
d)1000 gm set. Total 13 weights.
Masses rest in well drilled wooden block for each set. |
 BEAM BALANCE - FOUR BEAM
A high-form balance with four beams, each provided with a non-removable sliding mass, has total weighing capacity of 311 gm. No additional mass is required. Provided with spring loaded zero adjust compensator and magnetic damping, it has a pan of 90 mm diameter with two pouring spouts and handle. Height of stirrup approx 180 mm. A Platform housed in the base can be used for density determination.
Beams: 0-200 x 100gm, 0-100 x 10gm, 0-10 x 1gm, 0-1 x 0.01gm. |
 MASSES - SLOTTED
a] BRASS b] IRON
Any combination can be supplied. Accurate slotted hanger wire with hook. Slot in masses makes it easier to slide
masses in and out of hanger.
I) Slotted Masses 10, 20, 50, 100 gm.
II) Separate Hanger 10, 20, 50, 100 gm. |
 BEAM BALANCE - TRIPLE BEAM
This balance has three beams graduated 0-500 x 100 gm, 0-100 x 10 gm, 0-10 x 0.1 gm weight up to 610 gm can be read directly on the beam. Additional masses 2 x 1000 gm and 1 x 500 gm can be hung on the end of the beam (max. 2 at a time) which increases the capacity upto 2000 gm
Pan of 150 mm. Diameter.
Capacity : 2610 gm
Sensitivity: 100 mg |
 WEIGHTS - FRACTIONAL
In plastic case 1 mg to 500 mg |
 COMPRESSION BALANCE
Moulded plastic body in beautiful pastel colours. Durable, anti-rust-coated parts. Wide view dial. Zero adjuster with / without detachable rigid plastic load pan.
a) 500 gm x 5 gm c) 2 kg x 10 gm
b) 1 kg x 5 gm d) 4 kg x 20 gm |
 WEIGHTS - HEXAGONAL
With lifting rings 50 gm. to 1 kg. |
 ELECTRONIC BALANCE
Features:
a) Dual range: The scale automatically selects the best resolution for the amount being weighed.
b) Simple operation and quick response time for fast throughout. Operation can be learned in seconds.
c) Rugged heavy duty construction to take the punishment of daily use, cleaning and transportation.d) Stainless steel weighing pan for easy wash - down and moisture protected load cell for use in Harsh environments.
e) Built solid for industrial environments.
f) Mechanical overload protection and best quality load cells provide long-term reliability and low maintenance costs, even under harsh conditions.
g) Advanced micro computer based module card incorporates user selectable, tamper-proof, software calibration for long-term trouble-free operations.
Options:
· Optional battery operation for up to 8 hours of use.
· Parallel extended remote display
· Choice of one from 3 types of Pans, scoop, shallow dish and flat pan with Stainless steel platform.
|
CAPACITY |
DIVISION |
PLATFORM SIZE |
|
3kg/6kg |
1g/2gm |
190mm x 250mm |
|
6kg/15kg |
2g/5gm |
190mm x 250mm |
|
15kg/30kg |
5g/10gm |
190mm x 350mm |
|
600gm |
0.1gm |
150mm Dia |
|
3kg/6kg |
0.5g/1gm |
190mm x 250mm |
|
6kg/12kg |
1g /2gm |
190mm x 250mm |
|
12kg/30kg |
2g/5gm |
190mm x 350mm |
|
1.2kg |
0.1gm |
150 mm Dia |
|
2.4kg |
0.2gm |
150mm Dia |
|
6kg |
0.5gm |
190mm x 250mm |
|
12kg |
0.5gm |
190mm x 250mm |
|
24kg |
2gm |
190mm x 250mm |
General Specifications
a) Operating Temp. : -10°C to 50°C
b) Storage Temp. : -15°C to 60°C
c) Humidity : 10% to 95% relative humidity
d) Power : 220V -50HZ +/-10%
e) Power Consumption : 10 Watts
f) Display : L.E.D. Display.
g) Segments x 5 Digits x 12.5mm Height
|
 PAN BALANCE - SINGLE PAN
One side pan and other side plate made of CRC sheet with stainless steel or Brass Pan |
 PAN BALANCE - DOUBLE PAN
Cast aluminium beam has central knife-edge of special steel, tempered and ground . Two knife edges at beam ends
support the suspension system. Cast aluminium steel base with oven- baked paint. Two removable pans brass or
Stainless steel (bottom dia.15 cm) included.Beam carries a central pointer that moves against a scale to indicate
balancing.
Capacity (kg) : 1 / 2 / 5 / 10 / 15
Weights : Cast iron or Brass plated of appropriate configuration.
|
 WEIGHING BALANCE- PERSONAL
Accurate, sensitive mechanism. Available in different designs and range to choose from different colours. Flat Bathroom scales to weigh up to 130 kgs. |
 PLATE BALANCE-DOUBLE PLATE
With iron plates, pan on both sides
Capacity: 2 Kg, 5Kg,10 Kg |
 SUSPENSION BALANCE
With enameled metal body, dial 150 mm dia. Zero adjuster, suspension ring and load hook.
Length : 0 - 5 kg, 0 - 25 kg. |
 SPRING BALANCE- FLAT PLASTIC
( Scale divided into 100 divisions )
100gms, 250gms, 500gms, 1000gms. |
 SPRING BALANCE - TUBULAR - METALLIC
( Scale divided into 100 divisions )
100 gm, 250 gm, 500 gm, 1000 gm. |
 SPRING BALANCE- TUBULAR- ACRYLIC
Zero adjustment. Top suspension and bottom loading hooks.
Capacity : 100 gm, 250 gm, 500 gm, 1 kg. |
WEIGHING BALANCE- SENSITIVE
With hard chrome plated, hardened steel ring where the knife edge rests and 'S' hook on top for hanging. |
