LABORATORY ACCESSORIES |
BRUSHES FOR BEAKER
Nylon bristles, galvanised wire with sleeves
Dimension :
|
Dia mm |
Bristle Length mm |
Total Length mm |
| A) |
40 |
50 |
150 |
| B) |
75 |
100 |
250 |
|
 |
BRUSHES FOR BOTTLES
Nylon bristles, galvanised wire with sleeves
Dimension :
|
Dia mm |
Bristle Length mm |
Total Length mm |
| A) |
55 |
125 |
250 |
| B) |
70 |
140 |
380 |
| C) |
90 |
175 |
350 |
| D) |
115 |
200 |
350 |
| E) |
135 |
250 |
450 |
| F) |
160 |
300 |
500 |
|
 |
BRUSHES FOR TEST TUBES
Nylon bristles, galvanised wire with sleeves
Dimension :
|
Dia mm |
Bristle Length mm |
Total Length mm |
| A) |
11 |
100 |
200 |
| B) |
15 |
125 |
250 |
| C) |
15 |
150 |
250 |
| D) |
20 |
115 |
200 |
| E) |
25 |
160 |
300 |
| F) |
35 |
200 |
350 |
| G) |
40 |
160 |
300 |
|
 |
BLOW PIPES
For dissection use , brass chrome plated sizes 6", 8", 10", 12" |
 |
BUNSEN BURNER
For LPG or petrol gas, chrome plated, base painted with jet screws. Approx. Height 150 mm
A) Without stop cock
B) With Stop Cock |
 |
CHARCOAL BLOCK :
A) Size : 100 x 25x 25 mm
B) Size: 75x 25x25 mm
|
|
BOSS HEAD
Made of Aluminium Alloy, die casted with steel screws having two V- slots to accommodate rods up to 16 mm dia
A) Round Die casted Aluminium Alloy
B) Square Die Casted Alluminium Alloy |
|
BURETTE - Mild steel
Die pressed, made of mild steel, un-breakable chrome plated or painted
A) Single - to hold 1 burette
B) Double to hold two burettes |
|
FOUR CLAMP : FINGER
Die casted made of Al - Alloy provided with mild steel rod chrome plated and holds upto 75 mm dia article. Jaws are cork lined or rubber lined Made of Alloy |
|
CLAMP : THREE FINGER
Die casted made of Aluminum Alloy provided with mild steel rod chrome plated and holds upto 75 mm dia article.
Jaws are rubber lined Made of Aluminum Alloy |
|
CLAMP : TWO FINGER
Die pressed, spring controlled, cork / rubber lined jaws to hold from 12-50 mm dia articles with wing nut. Screw locked by spring.
A) Black painted
B) Chrome plated |
|
CLAMPS : G TYPE
Fast screw tightening, loosing. Opening 75, 100mm |
|
CORK BORER SHARPENER
Steel cutting blade is fitted in a slotted steel cone, wooden handle. |
|
CORK BORERS
With separate handle to each borer, cutting edge at bottom, brass, chromeplated, set complete with cleaning rod.
Set of a)Three b) Six c) Twelve |
|
CORKS
|
No. |
Top Dia. mm |
Bottom Dia. mm |
Height mm |
| a) |
000 |
6 |
4 |
13 |
| b) |
00 |
8 |
5 |
13 |
| c) |
0 |
10 |
7 |
13 |
| d) |
1 |
11 |
8 |
16 |
| e) |
2 |
13 |
9 |
17 |
| f) |
3 |
14 |
10 |
19 |
| g) |
4 |
16 |
11 |
12 |
| h) |
5 |
17 |
12 |
22 |
| i) |
6 |
19 |
13 |
24 |
| j) |
7 |
21 |
14 |
25 |
| k) |
8 |
22 |
15 |
27 |
| l) |
9 |
24 |
13 |
29 |
| m) |
10 |
25 |
20 |
31 |
| n) |
11 |
27 |
21 |
31 |
| o) |
12 |
29 |
22 |
31 |
| p) |
13 |
30 |
24 |
31 |
| q) |
14 |
32 |
25 |
31 |
| r) |
15 |
33 |
27 |
31 |
| s) |
16 |
35 |
27 |
38 |
| t) |
17 |
36 |
30 |
38 |
| u) |
18 |
38 |
31 |
38 |
| v) |
19 |
39 |
33 |
38 |
| w) |
20 |
41 |
34 |
38 |
|
|
GAS TAPS
Oxidised or chrome plated. Gas taps of gun metal, with lever handles.
A) Gas Taps - One way
B) Gas Taps - Two way
C) Gas Taps - Three way
D) Gas Taps - Four way |
|
DEFLAGRATING SPOON
Improved with friction sliding disc held by a cork to keep it at any height. Length 350 mm. up dia 18 mm, Disk Dia. 90 mm. |
|
DISSECTING SET
A) Set of seven instruments
Consists of the following:
Dissecting Scissor 5"sharp / blunt ends - 1 pc.
Dissecting Scissor 41/ 2" sharp ends - 1 pc.
Dissecting Forceps 5" blunt tips - 1 pc.
Dissecting Forceps 41/ 2" fine tips - 1 pc.
Knife Handle no. 3 - 1 pc.
Knife handle no. 4 - 1 pc.
Dissecting Needle pointed - 1 pc.
B) Set of 14 instruments
Above 7 instruments and in addition consists of the following :
Dissecting Needle Arrow - 1 pc.
Dissecting Needle Seeker - 1 pc
Dissecting flapper - 1 pc.
Dissecting razor - Stainless Steel - 1 pc.
Dissecting Magnifier 11/2" - 1 pc.
Chain Hooks - 1 pc.
Blow Pipe - 1 pc. thumb movement. |
|
FILTER PAPER - CIRCLES
ircles, Packet of 100 circles Dia (in cm) 7, 9, 11, 12.5, 15, 18.5, 24, 27, 32, 38.5 cm
A) Handmade
B) A-1 qualitative paper |
|
INDICATOR PAPERS
Size 65 mm x 10 mm. Contains 5 books and each book contains 20 leaves.
A) Packed in Card board Packet
B) Packed in Plastic Container
I) Litmus Paper : Blue.
II) Litmus Paper : Red
III) Congo Red Paper
IV) Led Acetate Paper
V) Methyl orabge Paper
VI) Potassium Iodide Paper
VII) Phenol red Paper
VIII) Starch Paper
IX) Starch Iodide Paper
X) Turmeric Paper |
|
LENSE HOLDER : OPTICAL
Wooden optical lense holder |
|
MICROSCOPE COVER SLIPS
Colourless, free from bubbles, pack of 10 gms. Thickness :
i) 0.08 mm - 0.12 mm
ii) 0.13 mm - 0.16 mm
A) Squares : Sizes 18 x 18 mm, 19 x 19 mm, 22x 22mm, 24 x 24 mm, 25x 25 mm
B) Rectangular : Sizes 22 x 25 mm, 22 x 30 mm, 22x40 mm, 22 x 50 mm, 22 x 60 mm, 24 x 40 mm, 24 x 50,
24 x 60, 25x 50 mm
C) Circular : Sizes Dia. 18 mm, 19mm, 22mm, 24mm |
|
MICROSCOPE SLIDES
Length : 76mm
Width : 26 mm
Thickness : 0.95, 1.15, 1.35 mm
Pack of 50 slides
A) Ground edges
B) Ground edges with one side frosted
C) Ground edges with both side frosted |
|
NET INSECT COLLECTION
Strong wire ring dia- 12" . Anodized aluminium handle fitted with hand grip. Heavy die - pressed clamp and fastening device issued for clamping the handle with net - ring. |
|
NET PLANKTON COLLECTION
35": long collection bag made of strong bolting netting cloth and mounted on wire ring dia 12" . Three strong leads attached to swivel front. Lower end of bag is provided with 2" opening with strong cloth pocket for trying the collection vial . |
|
PINCH CLIP
Thick wire chrome plated. |
|
PIPE CLAY TRIANGLE
Pipe clay stems on iron wire.
Size : 50, 60, 75mm. |
|
RETORT STAND
Rectangular cast iron powder coated basis with rods to be screwed in to bases. Rod is chrome plated. Base |
|
RETORT STAND RINGS
Cast iron, with boss, painted hammer tone. Plated thumb screw fitted to boss.
Rod dia : 2", 2.5", 3", 4", 5" & 6" |
|
RODS - DIFFERENT TYPES
A) Glass : size- 30 x1.25 cm
B) Ebonite : size- 30 x 1.25 cm
C) Brass : Size- 25 x 1.20 cm
D) Brass & Ebonite : Size 25 x 1.20 cm
E) Brass & Glass : size 25 x 1.20 cm
F) Perspex |
|
| RUBBER STOPPERS |
|
SPATULA : WITH HANDLE
Stainless steel, spatula blade with wooden handle. Supplied in pack of 10.
Blade length (mm): 75,100,125,150 |
|
SPATULA : ANGLE END
Angle end, rounded stainless steel, length 100 mm |
|
SPATULA : CHATTAWAY'S
Combination of round-blade / square-blade spatula is made of stainless steel. Highly finished. Length 175 mm. Supplied in pack of 10. |
|
SPATULA : RAISED CENTRE
Raised centre, one end flat and bent up and another end formed in to scoop.
Stainless steel length : 150 mm |
|
SPATULA : TROWEL
Double ended with trowel shaped scoop size 175 x 15 mm |
|
SPATULA : WITH SPOON
Spoon end ideal for crushing lumps, breaking cakes etc. square end useful for scraping, chopping etc. Polished
stainless steel. Pack of 10
Length : 200, 150 mm |
|
TEST-TUBE HOLDER : WIRE TYPE
Of plated spring steel wire, with a wire collar. Will accept test-tubes upto 38mm diameter. |
|
TEST-TUBE HOLDER : WOODEN
With Wooden handle |
|
TEST-TUBE HOLDER : WOODEN WITH SPRING
Wooden with steel spring for closing jaws. Length 185mm. To take tubes upto 19mm diameter |
|
TONGS: CRUCIBLE
Made of stout thick wire and stamped, jaws corrugated all chrome plated
A) Made of mild steel : Available in 6" and 8"
B) Made of Brass : Available in 6" and 8"
C) Made of Stainless Steel : Available in 6" and 8 " |
|
TRAYS MELAMINE : COLOUR - WHITE
Size : 326mm x 227mm x 15mm
[ Any other colour can be offered ] |
|
TRIPOD STAND
All steel welded, triangular or round top. Legs bent outwards for stability. Hammertone painted. Pack of 6.
Side (cms): 7, 12.5, 15 |
|
TUBING : RUBBER
Soft quality
Sizes :
|
Approx. Bore mm |
Wall thickness mm |
| a) |
4.0 |
1.0 |
| b) |
5.0 |
1.5 |
| c) |
6.0 |
1.5 |
| d) |
7.0 |
1.5 |
| e) |
8.0 |
1.5 |
| f) |
9.0 |
2.0 |
| g) |
10.0 |
2.0 |
| h) |
12.0 |
2.5 |
| i) |
16.0 |
3.0 |
| j) |
19.0 |
3.0 |
|
|
UNIVERSAL pH PAPER
Size 65 x 10 mm. Contains 5 books and each book contains 20 leaves.
A) Packed in Card board packet
B) Packed in plastic container
I) Range : 1 - 10
Ii) Range : 1 - 11
Iii) Range : 2 - 10.5 |
|
| UNIVERSAL pH PAPER - ROLL FORM |
|
WATER TAP
a) Movable Swan neck, nozzle, one way chrome plated. Plated / brass painted
b) 2 way, standard, Swan Neck, best quality, chrome plated / brass painted
c) Swan Neck 3 way, standard with 2 screw down side valves, high quality nozzle, chrome plated / brass painted. |
|
WIRE GAUZE
Square, iron, close mesh, size, 10 x 10cms , 15 x 15 cms
A) With ceramic centre
B) Asbestos centre |
|
WOODEN BURETTE STAND
A) For single burette
B) For two burettes |
|
WOODEN FUNNEL STAND
A) For single funnel
B) For two funnel |
|
WOODEN PIPETTE STAND
For keeping twelve pipettes in horizontal position |
|
WOODEN STAINING RACK
A) For 6 dropping bottles of 30 ml
B) For 12 Dropping Bottles of 30 ml |
|
WOODEN TEST TUBE STAND
Made of hardwood without pegs.
a) With 6 holes and 6 pegs
b) With 12 holes and 12 pegs |
|
APRON
|
|
| LABCOATS : |
|